Slideways Cube Printed Metal Version
- PRODUCTION INFO
- Made By:
- Starting:2017
- Ending:
- BATCH INFO
- Edition Size:
- Size (cm):5
- Batch Notes:
IMAGES
| Instance Name | Serial # | Notes | Construction |
|---|---|---|---|
| Slideways Cube Printed Metal Version Photo Shoot | these three pieces only stayed together long enough to take these photos, after which point I separated them and put each toward a C-Level version as the signature pieces | 316 stainless steel / bronze matrix | |
| Slideways Cube Printed Metal Version Production Photos | 316 stainless steel / bronze matrix | ||
| Showing Pages 1-2 of 2 Total | |||
Slideways Cube Printed Metal Version Photo Shoot
- CONSTRUCTION INFO
- Made From:
- INSTANCE INFO
- Serial Num:
- Markings:LEE KRASNOW 2017 @PACIFICPUZZLEWORKS xxx/125
- Notes:these three pieces only stayed together long enough to take these photos, after which point I separated them and put each toward a C-Level version as the signature pieces
IMAGES
270
269
instance
Slideways Cube Printed Metal Version Photo Shoot
Slideways Cube Printed Metal Version Photo Shoot
260
316 stainless steel / bronze matrix
notes
isPrimary
1
isAccent
0
isDecorative
0
isStructural
1
isMechanism
0
isVisibleExterior
1
isVisibleInterior
0
316 stainless steel / bronze matrix
LEE KRASNOW 2017 @PACIFICPUZZLEWORKS xxx/125
these three pieces only stayed together long enough to take these photos, after which point I separated them and put each toward a C-Level version as the signature pieces
Slideways Cube Printed Metal Version Production Photos
- CONSTRUCTION INFO
- Made From:
- INSTANCE INFO
- Serial Num:
- Markings:
- Notes:
IMAGES
using a high speed pencil grinder to deburr the sharp edges where machined surface meet printed surfaces
closeup showing a few of the rough edges still unfinished for comparison against the rest which has been done already
the first good one to come off the production line! so proud!!
the first two complete puzzles worth of pieces in this style!
change notes for the printing vendor to review
more change notes
sometimes the printed surfaces did not clean up all of the way during machining. I was not sure if the problem was my probing routine, or perhaps degrading quality of the prints toward the end of meeting their delivery quota
when parts did not clean up all the way, I would grind off the serial number and try again. That's why I only got up to 72/125 before running out of printed parts to machine.
271
269
instance
Slideways Cube Printed Metal Version Production Photos
Slideways Cube Printed Metal Version Production Photos
260
316 stainless steel / bronze matrix
notes
isPrimary
1
isAccent
0
isDecorative
0
isStructural
1
isMechanism
0
isVisibleExterior
1
isVisibleInterior
0
316 stainless steel / bronze matrix
269
251
production
Slideways Cube Printed Metal Version
73
Lee Krasnow
2017
5